Today I finished putting together the structure (minus the roof) and applied all the siding. Wasted a ton of blue painter’s tape, but with good results!

Thank god for paint cans and those little pinchy things…

Lo and behold, I have a little house!

It seems weird to me that part of the main roof peeps out from under the dormer roof at the bottom. I’m planning to shave off those corners. The roof will be shingled with leftovers from my Fairfield.

While the siding glue was drying, I applied some wood filler to the front base (but not the back yet). I’m going to use the drum sander attachment on the Dremel to round off the porch corners… at the moment they’re dangerously pointy!

Tomorrow I’m going to start painting. The roof isn’t glued on yet; first I want to paint the undersides of the eaves, which I’ll do at the same time I’m painting the house. I’m planning to use “Belgian Waffle,” a creamy/peachy color I got free from Glidden when they were doing a promotion over the summer. Haven’t cracked it open yet so I’m not positive what it’ll look like, but here’s the paint chip (if the internet is to be believed). I’m not sure what color the trim will be… maybe light blue.

I went back and forth on whether to include the porch roof, and have decided to include it. Since my siding covered up the slots the roof was supposed to fit into, I’m planning to glue some 45-degree triangular blocks to the back of the roof and side of the house, to hold it in place. It’s an untested method but I think it’ll work.

Here’s sort of how it’ll look. But centered on the door, and without my hand attached to it.

While the glue was drying I went through my bin of kits and pulled out a few Cassidy Creations pieces that I want to build for this house: a china cabinet and kitchen table for the kitchen, and possibly this armoire for the bedroom. (Not sure about that one – it may be too tall to fit against any of the walls, due to the slanted roof.)

I’m thinking this house will be somewhat old timey, with a 1930’s range and fridge. I’d really like to find some Shaker style ladder back chairs to go in the kitchen and did a little looking around online, but so far haven’t found what I want. For the bedroom, I’m thinking of the cottage bed. I haven’t had any great ideas for the living room yet, or the smaller upstairs room. I’m not sure if I want it to be a bathroom… seems like a waste of a room (how original can you make a bathroom?)

Coming next time… paint!

I’m loving how easy this house is to put together!

This morning I poked around at Michael’s and Dollhouses, Trains, and More, looking for scrapbook paper or wallpaper for the inside of the cottage. Nothing caught my eye and I decided to move forward with assembly and worry about the inside later. I have some ideas for furnishings already but it’s not stuff I already own, so there’s no rush.

At Michael’s I picked up a bottle of Gesso. I haven’t used it before but people on the Greenleaf forum recommended priming my windows and door with it so the paint will look the same on both (my windows are plastic and the door is wood, and I worried that the two different finishes would cause problems come painting time). While I was there I peeked in the craft department, as usual, and saw a ton of Creatology puzzles but no houses. Are wooden replicas of dinosaurs, skeletons, helicopters, and the Eifel Tower really popular enough to keep stocking them, but not the houses? I don’t get it.

I wanted some 7/16″ basswood for the base of the house, but the closest I could find was 3/8″. I also picked up some 1/4″ square basswood to use as porch posts, and half scale porch spindles. I’m pretty sure I already have railings tucked away somewhere.

Since the 3/8″ basswood was a little too short to fill the gap under the porch the way I wanted, I improvised by first gluing some (slightly thicker than 1/16″) trim from the kit that I’m not planning to use to the bottom of the porch and at the back of the floor.

This is the trim marked “A” and “C” in the kit, if you thinking of trying this yourself.

While that was drying, I cut the basswood to size, then glued that on over the trim.

The basswood I used is 3/8″ square, which makes for a nice sturdy base. I didn’t go all the way around with it – just used it in places where you could see a gap.

The basswood plus trim was a bit taller than what I needed, leaving a slight gap where the sides were no longer sitting flush on the table, but I used the mouse sander and some plain old sandpaper to even it out. (Alternatively I could have used siding to cover up the slight gap at the bottom sides but since I already cut my siding last night, that wasn’t an option.) I still need to apply some wood filler, to even out the seams where the different pieces of wood meet, but I think it’ll look real nice when it’s done… much classier than the original design that had an open space under the porch and the floor.

When that was done, I cut the rest of the siding for the front of the house and did a bit of sanding around the window holes to make sure everything will fit well. Then I glued in the divider between the two first floor rooms, and the second floor. The house is currently being squashed under paint cans, much like last night…

Tomorrow I should be able to get the rest of the assembly finished, glue on my siding, and maybe even start painting. I repeat, I love this easy little house!